SIP Series 0.1W 25V to 90V & 1W 25V to 100V

Regulated  DC to High Voltage DC Converters

Ideal for APD biasing and MEMS driver applications, the SIP Series provides high performance in an ultra-thin, miniature single in-line package. Designed for low cost, high quantity applications, these DC to DC converters deliver high stability with very low ripple. The output voltage is programmable via a 0 to 5 volt analogue voltage.
The output voltage is inversely related to the programming voltage, i.e. applying 5 volts to the programming sets the output voltage to the minimum level. Conversely, 0 volts on the programming sets the output voltage to the maximum level. The supply is linearly programmable through this range*2. An enable/disable function is included.
Applying a TTL Low (open collector compatible) disables the output voltage to less than 10 volts.

Features

  • Regulated
  • Ultra-Thin, Single In-Line Package (0.16 in/4 MM)
  • Low Ripple Biasing Supply
  • 25V to 90V and 35V to 100V Output Voltage
  • Higher Performance, Low Cost
  • Enable/Disable Pin
  • Analog Programmable
  • Very Light Weight
  • MTBF>2.03 Million Hours

Applications

  • Photomultiplier Tubes
  • Mass Spectrometers
  • Avalanche PhotodiodeAvalanche Photodiode
  • Piezo Materials
  • Igniters
  • Capacitor Charging

 

Specifications Table

Dimensions: 
P: 1.38 x 0.68 x 0.25 in (35.05 x 17.27 x 6.40 mm)
Input Voltage: 
5 VDC to 12 VDC
Operating Temp: 
-10°C to +70°C Standard  (-40°C to 85°C Extended) – CASE

Series Table

ModelInputOutputPower
P12N5 to 12 Vdc0 to -1200 V / 0.000002 A0.0024W
P12P5 to 12 Vdc0 to +1200 V / 0.000002 A0.0024W
P20N5 to 12 Vdc0 to -2000 V / 0.000001 A0.002W
P20P5 to 12 Vdc0 to +2000 V / 0.000001 A0.002W