Higher power density has become a critical factor for telecom operators over the last years due to limited space to install comms equipment and high power battery backup solutions. 3U Rack – 100Ah Lithium-Ion Phosphate Battery lighter weight, safe operation, high-temperature performance and long battery life can satisfy the requirements of new and existing outdoor and indoor telecom sites.
The battery system uses a high-performance battery management system (BMS) which automatically manages and measures the battery’s charging and discharging current, and manages the battery’s float charge and boost charge. It has high charge currents (short charge period). The battery system has good electromagnetic compatibility.
SDA10-48100 has been widely used in backup power of telecommunication field such as access network equipment, far-end telephone exchange, mobile telecommunication equipment, transmission facility, satellite earth station and microwave communication equipment etc.
|Rated capacity||100Ah(C5 ,0.2C to 40V at 25 ℃ )|
|Operating voltage range||40V-56.4V|
|Boost charge/Float charge voltage||54.5V/52.5V|
|Charging current (current-limiting )||10A|
|Charging current (Maximum)||100A|
|Discharge current (Maximum)||100A|
|Discharge cut-off voltage||40V|
|Installation method||Rack-mounted / Wall-mounted|
|Communication interface||RS232/RS485*2/Dry contact*2|
|Parallel communication||Maximum support for 16 sets of parallel|
|Alarm and protection||Overvoltage, under-voltage, short circuit, overload, over current, over temperature, low-temperature protection, etc.|
|Recommended operating temperature||Charge||+15℃~+35℃|