P Series 2mW  ±2kV & 2.4mW ±1.2kV

Regulated  DC to High Voltage DC Converters

The P Series of micro-power DC to high voltage DC converters feature extremely low ripple (<100µV) and low EMI/RFI due to a unique magneticfree design. Very low power consumption and lightweight, with a case height of less than 0.220 inches, make these PC mount modules ideal for portable, battery-powered equipment.

Fully regulated and programmable outputs of 0 to 1200 volts or 0 to 2000 volts are available in positive or negative polarity. A precision onboard reference and high impedance voltage programming input allow for easy plug-and-play designs. An output voltage monitor is standard. Soft-start high voltage ramp-rates protect sensitive detectors to support long term reliability


  • High-Voltage Supply
  • Precision Regulated
  • Ultra-Low Noise, Magnetic Free Design
  • 0 to 100% Programmable
  • 1.2kV to 2kV Output Voltage
  • Light Weight, Shielded Case
  • Positive or Negative
  • Voltage Monitor
  • Soft-Start for Sensitive Detectors
  • MTBF>1.6 Million Hours


  • Grid BIas
  • Piezo Devices
  • Portable Battery Powered Devices


Specifications Table

P: 1.38 x 0.68 x 0.25 in (35.05 x 17.27 x 6.40 mm)
Input Voltage: 
5 VDC to 12 VDC
Operating Temp: 
-10°C to +70°C Standard  (-40°C to 85°C Extended) – CASE

Series Table

P12N5 to 12 Vdc0 to -1200 V / 0.000002 A0.0024W
P12P5 to 12 Vdc0 to +1200 V / 0.000002 A0.0024W
P20N5 to 12 Vdc0 to -2000 V / 0.000001 A0.002W
P20P5 to 12 Vdc0 to +2000 V / 0.000001 A0.002W