The Multi Guard Industrial range was specially developed to ensure power continuity in all sectors deemed critical due to the specific environmental conditions or industrial processes requiring protection.Multi Guard Industrial is available in a 20 kVA standalone version and in modular versions from 20 to 160 kVA. The two versions are available in both single-phase and three-phase output configurations. This high level of flexibility allows Multi Guard Industrial to accept both single-phase and three-phase inputs with no need for special set ups or operator intervention, ensuring full compatibility with any power supply network.
Multi Guard Industrial is available in two versions: single-phase and three-phase output, whilst the input stage accepts both a triplet of three-phase supplies out-of phase by 120° (three-phase 400 V+N) or a triplet of power supplies in phase (singlephase 230 V+N). Thanks to its power supply recognition function the UPS is able to adapt to the input power supply with no need for additional configuration, ensuring the same performance under both applied voltage conditions.
Thanks to the technology it employs, Multi Guard Industrial solves all problems connected with insertion into power supply grids with limited power, where the UPS is supplied by a generator and where the same network includes single-phase (e.g. railway voltage) and three-phase (e.g. emergency power supply from a generator) supplies. Multi Guard Industrial has zero impact on the power supply source, whether it is a mains grid or generator set, single-phase or three-phase:
In addition, Multi Guard Industrial plays a filtering and power factor correction role in the power network upstream of the UPS as it eliminates harmonic components and reactive power generated by utility suppliers.
The mechanical structure of Multi Guard Industrial makes it particularly versatile for use in many different sectors.
The basic building blocks are 20 kVA UPS. The cabinet is able to house up to four 20 kVA modules and up to two cabinets can be connected in parallel for a total of eight UPS modules and 160 kVA of power. The module connection clamps are laid out so that the communication signal connections are segregated and separated from the power connections (input, output, by‑pass line, battery), thus ensuring complete immunity from interference
generated by the power supply grid, which is typically disturbed in industrial environments.
Both versions (single-phase and threephase output) are provided with a by‑pass line separated from the power supply line. This ensures greater availability in that the customer may have a preferential line for the by‑pass that is not restricted by the potential interference or interruptions that the UPS power supply line may be subject to.
The UPS module has a front to back air flow, allowing the UPS to be installed in any environment and preventing the types of ingress problems associated with topvented circulations cabinets.
Every UPS module in the Multi Guard Industrial range can be equipped with a parallel board, a relay board with eight programmable outputs and three inputs (one of which is programmable), and two slots for housing communications interface boards from the MultiCOM range, making the UPS compatible with the various types of protocols and supervision systems typical of the industrial environment. The cabinet is designed to house up to four UPS modules. I t has an area that contains all the protection devices and disconnectors for the individual modules (4 input disconnectors, 4 battery disconnectors, 4 bypass line disconnectors and 4 output disconnectors), as well as a manual bypass for isolating the four modules and guaranteeing power continuity in the event of the complete failure of all the UPS units or in the event of scheduled system overhaul.
The cabinet is also equipped with an area that can be used for the insertion of a whole range of accessories for monitoring power that the user can request (surge arresters, energy meters, earth discharge detectors, output distribution, release coils, etc), making the solution compact and optimised for any field of use.
Multi Guard Industrial can be purchased as a single 20 kVA UPS module and installed in any cabinet or mechanical support provided by the user. The power terminals (input, output, battery) are connected by Harting connectors, ensuring simplicity and operating safety during insertion/removal, protection against electrical contacts and immunity from environmental conditions typical of industrial environments (dust, humidity, suspended chemical particles).
The removal and replacement of a faulty module or the addition into the system of a further UPS module to increase available power or redundancy can be carried out easily by the operator responsible for the system.
Multi Guard Industrial is the ideal solution for industrial environments in which the UPS must adapt to the various requirements typical of this application. Aside from the distinction between single-phase and threephase output voltages, the UPS module can be used as a stand-alone unit or in a parallel configuration; by simply adding the parallel configuration board in the slot on the front of the module, the UPS can grow as requirements demand (from 20 to 160 kVA).
|MODEL||NUMBER PHASES OUTPUT||BYPASS VOLTAGE||OUTPUT VOLTAGE|
|GMI M||1||380-400-415 Vac, three-phase + N||220-230-240 Vac, single-phase + N (selectable)|
|GMI T||3||380-400-415 Vac, three-phase + N||380-400-415 Vac, three-phase + N (selectable)|
|Voltage||380-400-415 Vac, three-phase + N and 220-230-240 Vac single-phase + N|
(input voltage recognition function)
|Frequency tolerance||40 – 72 Hz|
|Power factor at full load||> 0.99|
|Current distorsion||thdi ≤ 3%|
|Nominal Voltage||see series table|
|Voltage tolerance||180 – 264 V (selectable) referring to neutral phase|
|Bypass Overload||125% for 60 minutes, 150% for 10 minute|
|Voltage||see series table|
|Voltage stability||≤ 1%|
|Frequency||50 Hz / 60 Hz|
|Power||20 kVA / 18 kW|
|Output power||20 kVA x number of modules, up to a maximum of 8 (max. 160 kVA)|
|Layout||independent batteries for each UPS module or shared by the UPS system|
|Recharge time||6 hours|