MPS Ultra – 2U Redundant Hot Swap Modular DC Power System up to 5.6kW
19'' Rack Mount AC/DC Power Supplies, AC/DC Power Supplies, Battery Chargers, DC Power Systems & Accessories , Modular & Configurable Battery Chargers, Rack Mount DC Systems
- Intelligent Control Module
- Remote power monitoring and control over Ethernet
- 150A Low Voltage Disconnect
- Choice of 2.8, 3.5 or 5.6 kilowatts of output power
- HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 protocols supported
- Monitored outputs can be power cycled individually over Ethernet
MPS Ultra
2U Redundant Hot Swap Modular DC Power System
The 2RU MPS Ultra DC power system from ICT delivers up to 5.6 kilowatts of power in three factory pre-configured systems that make installation and setup a breeze.Available for 48, 24 or 12 volt DC applications, MPS Ultra systems are preconfigured at the factory to provide fast, easy installation at the site. With Ethernet-based remote monitoring and DC power control, advanced battery management features, integrated dual 100A battery breakers, and up to 12 fully managed load outputs that can be monitored and power-cycled remotely, the MPS Ultra provides unmatched capability for demanding wireless applications.
Power Chassis
- 2RU Power Chassis configured at factory for fast, easy installation
- All connections are accessible from the rear, there are no covers to remove during setup
- Accepts 48, 24 or 12 volt DC hot-swappable ICT 700 watt
Power Modules (depending on model)
Integrated Intelligent Control Module
- TCP/IP remote Ethernet communications for monitoring and control of all system parameters through a single I.P. address and fully integrated user interface
- Embedded web server for plug and play set up
- HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 protocols supported
- Alarms can be sent to multiple email accounts
- Four site monitoring sensor inputs with alarm reporting
- Data logging of AC, DC, alarms and load current conditions
- Password protection with multiple security levels
- AC input voltage, DC output voltage, system current reporting (local
and Ethernet)
Load Distribution Features (2.8 & 3.5kW and 4.2kW models)
- Load current monitoring and alarm reporting of each output for pinpointing of issues with connected loads
- Outputs can be power cycled individually over Ethernet
- Adjustable alarm and load-shed settings for each output
- Max 30A circuit breakers
Battery Management Features (2.8 and 3.5KW models)
- Temperature compensated charging, display of battery voltage, status, battery current, state of charge, and run time remaining
- Adjust LVD settings remotely
- Configure advanced battery management features such as boost charge parameters, max charge current, battery capacity, battery test timer, and battery discharge testing
700 Watt Power Modules (order separately)
- 100-300 volts AC input with Power Factor Correction
- 48, 24 or 12VDC volts nominal DC output
- 90-93% efficiency
- -30 to +60C operating temperature range
Specifications Table
| AC INPUT | |
| Nominal system voltage | 120/240VAC |
| Input voltage range | 100-300VAC |
| Power factor (typical) | 0.99 |
| Frequency | 50/60Hz |
| DC OUTPUT | |
| Check Out Datasheet Above | |
| MECHANICAL | |
| AC input connector | Terminal Block, #8 – #16 AWG |
| DC output connector | Busbars with 5/16” bolts |
| Remote alarm connectors | Terminal Block (#16 -24 AWG) |
| Mounting | 2RU, 19 in rack mount |
| Weight (Exc.Power Modules) | 30lbs / 13.6 kg |
| Dimensions – H X W X L | 3.5 x 19.0 x 15.7 in. / 89 x 483 x 398 mm |
| ENVIRONMENTAL | |
| Operating temperature range | -30º to +60ºC |
| Output derating | 2% / ºC (above 50º C) |
| Storage temperature | -45º to +85ºC |
| COMMUNICATIONS & CONTROL | |
| Front Display | High resolution OLED with function keys |
| Remote Communications | TCP/IP 10/100 Base-T |
| I.P. Protocols | HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 |
| Inputs | 4 digital, 1 analog temp sensor contacts |
Communications & Control
| COMMUNICATIONS & CONTROL | |
| Front Display | High resolution OLED with function keys |
| Remote Communications | TCP/IP 10/100 Base-T |
| I.P. Protocols | HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 |
| Inputs | 4 digital, 1 analog temp sensor contacts |
| Monitoring functions | |
| 5.6KW model | AC input, DC output V and A, Power Module status, system current, alarms reporting |
| 2.8KW & 3.5KW models | AC input, DC output V and A, Power Module status, system current, battery voltage, battery current, state of charge, run time remaining, LVD status, load current monitoring, alarms reporting |
| Control Functions | |
| 5.6KW model | Enable/disable DC outputs, adjust output voltage and current settings, auto restart delay time |
| 2.8KW & 3.5KW models | Enable/disable DC outputs, adjust output voltage and current settings, auto restart delay time, battery equalization, discharge test, LVD setpoints, power cycle load outputs, auto load-shedding, network watchdog, power-on sequencing, customizable input alarm labels and settings |
