HPT5K0 Series

3Ph Programmable AC/DC Power Supply

The HPT5K0 series offers users both output voltage and output current programming, via voltage, I2C PMBus, RS485 and CANopen in a very high efficiency, hig power density 5 kW chassis mount package. Options are available for RS232 or UART. Measuring just 13.0″ x 5.0″ x 5.0″, the HPT5K0 also features active current sharing , remote on/off, remote sense and power OK signal. The standby output is available whenever the mains supply is present.

5kW AC-DC power supplies with both ITE/industrial and medical agency approvals that feature a three-phase, three-wire, 180 to 528VAC input. This drastically simplifies installation as there is no need for a neutral connection, which is often not available in industrial applications.

A Graphical User Interface (GUI) is also provided to support system development & define unique user profiles allowing tailoring of the HPT5K0 units to the end application, including signals & controls, without hardware changes, thereby reducing design time. This capability also allows the same base unit to be used across multiple applications, reducing cost by driving economies of scale. The HPT5K0 series supports I²C, RS232 & RS485 serial buses with multiple digital protocols including PMBus, CANopen, MODBUS and SCPI, offering flexibility to designers. Full documentation is provided.

Packaged in a compact chassis mount package, measuring just 330.2mm x 127.0mm x 127.0mm, the supplies offer excellent power density and efficiency levels up to 94%, occupying significantly less space than similar products. The supplies can be configured in series or in parallel with full current sharing providing a flexible, high-density and cost-effective building block for developing high power systems up to 25kW with output voltages 48VDC to 400VDC

The HPT5K0 series is ideal for a broad range of industrial, technology, semiconductor fabrication and medical applications, including high power LED applications such as UV curing & heating, burn in equipment, lasers, motor controllers, industrial printing (2D & 3D), EV charging, test equipment, battery simulation and medical imaging devices. The power supplies feature very fast output slew rates of <40ms, making them well-suited to challenging test applications. A thermally-controlled fan keeps the units cool with minimal audible noise.

Series Table

Model NumberMax Output PowerMax Output VoltageMax Current

Specifications Table

CharacteristicMinimumMaximumNotes & Conditions
Input Voltage180 VAC264 VAC3 kW output power max
Input Frequency342 VAC528 VAC5 kW output power max, 3 wire & earth
Inrush Current60 APer phase, 528 VAC (5 kW)
Output Voltage0210VDCSee models and ratings table
Output Voltage Program0105%Of nominal, slew rate <40 ms 10-105% & 105-10%.
Max frequency of voltage program is 0.5 Hz 0-5% load,
0.67 Hz 5-10% load, 1Hz 10-20% load, 3 Hz 20-100% load
Efficiency93%Measured from 342 to 528 VAC,
5V Standby at full load.
Isolation Input to Output4000VAC2 x MOPP. Barrier only
Isolation Input to Ground1500VAC1 x MOPP
Isolation Output to Ground500VDC
MTBF95kHrsMIL-HDBK-217F, 25 °C GB
Operating Temperature-20C70C”Derate linearly from 50°C to 50% rated power
at 70 °C
CoolingForce-cooled with intelligent fan speed control