- Home
- Our Products
- DC UPS SystemDC UPS Systems Power Supply + Battery Charger in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- AC/DC Power Supplies
- Battery Chargers
- AC UPS & Transfer Systems
- Batteries
- DC/AC Inverters
- DC/DC Converters
- DC Power Systems & Accessories
- NEWPower Systems Automation SolutionsPower Systems Automation Software Improve Engineering Efficiency And Enhance Visibility And Control With Our Power And Utilities Software Solutions Streamline data collection, device management, and regulatory compliance processes while maintaining uninterrupted power services with our customizable, easy-to-use power system automation solutions and unbeatable technical support.” For queries about our Power Automation Solutions please contact us at power.systems.automation@heliosps.co.nz
- Remote Battery Monitoring Systems
- Power Quality Solutions
- Surge Protection
- Lightning & Grounding
- Low Voltage Power & Grounding Connections
- Electrical Fixing, Fastening & Support Products
- Custom Solutions
- Solutions by Industry
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
- Home
- Our Products
- DC UPS SystemDC UPS Systems Power Supply + Battery Charger in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- AC/DC Power Supplies
- Battery Chargers
- AC UPS & Transfer Systems
- Batteries
- DC/AC Inverters
- DC/DC Converters
- DC Power Systems & Accessories
- NEWPower Systems Automation SolutionsPower Systems Automation Software Improve Engineering Efficiency And Enhance Visibility And Control With Our Power And Utilities Software Solutions Streamline data collection, device management, and regulatory compliance processes while maintaining uninterrupted power services with our customizable, easy-to-use power system automation solutions and unbeatable technical support.” For queries about our Power Automation Solutions please contact us at power.systems.automation@heliosps.co.nz
- Remote Battery Monitoring Systems
- Power Quality Solutions
- Surge Protection
- Lightning & Grounding
- Low Voltage Power & Grounding Connections
- Electrical Fixing, Fastening & Support Products
- Custom Solutions
- Solutions by Industry
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
Product Information
- Power 220/230/240Vac and 48Vdc loads
- Charges batteries (Compatible with a variety of battery chemistries, such as lead acid, lithium-ion, and nickel cadmium)
- Wide operating temperature -40ºC to +70ºC (maximum power up to 50°C and derating above)
- Compliant with Shock and vibration MIL-STD-810 & MIL-STD-461 standards
- Optional controller HCTMBOX for remote monitoring (Modbus RS485, Modbus TCP, SNMP v1, v2C and v3, HTTP/HTTPS)
- Up to 3kW output power can be achieved (using 3 modules and a junction kit)
SKU: HPS-OUTDOOR-POWER-SYSTEM-HT1KWMP
Multidirectional
Power
High
Operating
Temperature
Optional
Remote Monitoring
Outdoor
Applications
Battery
Charging
Fanless
HT1KWMP is an IP65 multidirectional power converter that can power 48Vdc, 230Vac loads and charge batteries at the same time. It was specially designed and manufactured for outdoor, high-temperature, and remote applications requiring high reliability, efficiency, and compliance with military specifications for shock and vibration and electromagnetic interference (MIL-STD-810 and MIL-STD-461).
When to use:
- When your application is exposed to harsh environmental and physical conditions such as:
- Corrosive atmosphere (ships, hydrogen plants)
- Heavy rain
- Water splashes
- Extreme dust
- Extreme temperatures
- High shock and vibration
- Difficult access
- Extreme dust
- Extreme temperatures
- Hight shock and vibration
- Difficult access
How to install:
Outdoor pole mounted
- Telecom antenna
- Security camera / speed control cameras
- Intelligent traffic solutions
- Offshore wind farms and oil rigs
Onboard wall/chassis mounted
- Outside broadcasting
- Transportation systems (trains, boats, etc.)
- Military operations
Principle of Operation
Each module can supply up to 1000W on any AC, DC or combination of both AC and DC output ports. The three fully bidirectional ports (AC/AC/DC) built into each module can all function as input and output. This means you can use it to secure AC & DC loads and charge the batteries at the same time. The internal DC energy buffer dynamically distribute the power between AC and DC according the needs. No configuration is required.
Options:
- Optional HCTMBOX smart controller (Modbus RS485, Modbus TCP, SNMP v1, v2C and v3, HTTP/HTTPS)
- Up to 3kW output power (using 3 modules and a junction kit)
| Weight | 3.85 kg |
|---|---|
| Dimensions | 366.5 × 144 × 85.7 mm |
Specifications Table
| General | |
| Model | HT1KWMP |
| Part Number | T711730105 |
| Cooling | Natural convection |
| MTBF | 200 000 hrs (MIL-217IF) |
| Dielectric strength DC/AC | 4300 Vdc |
| RoHS / Material (casing) | Compliant / Aluminium |
| Operating T° / Relative Humidity | Compliant to ETSI 300-019-1-4 class 4.1E -40°C to +70°C derating above 50°C / 0-100% |
| Storage T° / Relative Humidity | Compliant to ETSI 300-019-2-4 class 4.1E -40°C to +70°C / 0 to 100% |
| Shock & Vibration | Design for on board vehicles and ship |
| Altitude above sea without de-rating of power | < 1500 m / derating > 1500 m – 0.8 % per 100 m / max 4000 m |
| Power | |
| AC Input Data | |
| Nominal voltage (AC) / Current | 230 Vac / Max 5.4 Amps |
| Voltage range (AC) | 150 – 265 Vac (derating below 195Vac) |
| Brownout | 1000 W at 185 Vac linear decreasing |
| Power factor / THD | > 99% / < 3% |
| Frequency range (selectable) / synchronization range | 50 Hz (range 47 – 53 Hz) / 60 Hz (range 57 – 63 Hz) |
| DC Input Data | |
| DC voltage: Nominal / range | 48 Vdc / (40-60V) |
| Nominal current (at 48 Vdc and 900 W output) | 20 A |
| Maximum input current (for 15 second) / voltage ripple | 31 A / < 10 mV RMS |
| AC Output Data | |
| Efficiency AC to AC (EPC) / DC to AC / AC to DC | 96% / > 93% / > 93% |
| Nominal voltage AC (Adjustable) | 230 Vac (200 – 240 Vac) |
| Frequency / frequency accuracy | 50 or 60 Hz / 0.03% |
| Nominal Output power | 1200 VA / 1000 W @ 230 Vac |
| Short time overload capacity | 150% (15 seconds) |
| Admissible load power factor | Full power rating from 0 inductive to 0 capacitive |
| Total harmonic distortion (resistive load) | < 3% |
| Load impact recovery time (10% – 90%) | ≤ 0.4 ms |
| Nominal current | 5.4 A @ 230 Vac |
| Crest factor at nominal power | 3 : 1 for load P.F. ≤ 0.7 |
| Short circuit clear up capacity at AC input / On battery | 21 A for 20 ms |
| Short circuit current after >20 ms | 8.1 A for 15 seconds |
| AC output voltage stability | ±1% from 10% to 100% load |
| DC Output Data | |
| Nominal voltage (range) | 53.5 Vdc (44 – 60 Vdc) |
| Maximum power | 1000 W with 230 Vac input voltage |
| Maximum current at 48 Vdc | 20 A |
| Reverse polarity protection | YES |
For technical support about our off the shelf products and customised power conversion solutions, get in touch today.
HT1KWMP Outdoor Power & B... © Copyright Helios Power Solutions 2023