LCP01A - Load Cell Protector

LCP01A – Load Cell Protector

Surge Protection, Data And Signal Surge Protection, Load Cell Protector

Six wires and shield protection works with four or six wire systems.
Suitable for compression or tension cells.
Low series impedance, loadcells do not need recalibration.
NEMA-12 (IP-55) rated, suitable for outdoor use.
Helps protect against excitation over-voltage and prevent loadcell damage.

LCP01A Series Datasheet

SKU: HPS-SURGEPROTECTION-DATA-AND-SIGNAL-LCP01A Categories: Surge Protection, Data And Signal Surge Protection, Load Cell Protector

Description
SPECIFICATIONS TABLE

Load Cell Protector.

SPECIFICATIONS TABLE

SPECIFICATIONS TABLE

Part Number	LCP01A
Article Number	701610
Max Discharge Current (Imax), Shield to Ground	10 kA 8/20 μs
Max Discharge Current (Imax), Signal to Shield	0.3 kA 8/20 μs
Voltage Protection Level (Up), Shield to Ground	90 V
Voltage Protection Level (Up), Signal to Shield	30 V
Voltage Protection Level (Up), Signal to Signal	15 V
Loop Resistance	0.3 Ω
Technology	Silicon Avalanche Diode (SAD)
Material	Acrylonitrile Butadiene Styrene
Enclosure Rating	NEMA® 12 (IP55)
Depth (D)	110 mm
Height (H)	56 mm
Width (W)	75 mm
Unit Weight	0.25 kg
Temperature	-40 to 80 °C
Standard Packaging Quantity	1 pc
UPC	78285644014
EAN-13	9321098000804

Related Products

SES40P2401P – Service Entrance Suppressor(P) 40 kA

Compact design can be directly mounted to panel or installed in a small space.
Front-facing design eases installation and performance monitoring.
40 kA 8/20 μs maximum surge rating per mode.
UL 50 Type 4X.
Optional Flush Mounting Plate.

SES40P2401P Series Datasheet

TDX100M277/480TT – Modular TDX Panel Protector- 100kA – 277/480 V Un – 3Ph 4W+G

Compact NEMA-4 enclosure.
Remote contacts provide remote status monitoring.
100 kA 8/20 μs maximum surge rating provides protection suitable for main-distribution panels and an extended operational life.

TDX100M277480TT Series Datasheet

SGD11002SNE – SPARK GAP DIVERTER 140 kA 8/20 μs

Effective equipotential bonding provides N-PE equalization protection bond on TT power distribution systems.

SGD11002SNE Series Datasheet

TDS350TT277 – Transient Discriminating Surge Diverter 50 kA TT System

TDS350TT277 has been replaced by EDT230031R
50kA 8/20μs maximum surge rating provides protection suitable for sub-distribution panels and a long operational life.
Separate plug and base design facilitates replacement of a failed surge module.

TDS350TT277 Series Datasheet

TSF20A240V – Transient Surge Filter 240 V Un 20A

Compact, space saving design.
Replaceable surge module reduces down time and unprotected time during maintenance.

TSF20A240V Series Datasheet TSF20A240V Series Instruction Sheet

SGD1251SRNE – Modular Spark Gap Diverter 60 kA 8/20 μs Max Discharge Current (Imax)

Effective equipotential bonding provides N-PE equalization protection bond on TT power distribution systems.

SGD1251SRNE Series Datasheet

SRF163N – Surge Reduction Filter N-Series – Single Phase 63A

High surge rating ideal for exposed critical service entrance applications.
Extreme reliability.
Comprehensive front panel status and internal diagnostic LEDs.

SRF163N Series Datasheet

DSF20A275V – DIN Rail Surge Filter 20A 220-240 V Un

Three modes of protection: L-N, L-PE and N-PE.
LED power indicator.
DIN rail mount provides simple installation

DSF20A275V Series Datasheet

TDX200M277480TT – Modular TDX Panel Protector 200kA – 277/480 V Un – 3Ph 4W+G

Compact NEMA-4 enclosure.
Remote contacts provide remote status monitoring.
200kA 8/20μs maximum surge rating provides protection suitable for service entrance, main-distribution panels and highly exposed applications.

TDX200M277480TT Series Datasheet

TDS1502BR240 – Transient Discriminating Surge Diverter, 50 kA Two Mode

100kA 8/20μs maximum surge rating provides protection suitable for sub-distribution panels and a long operational life.
Separate plug and base design facilitates replacement of a failed surge module.

TDS1502BR240 Series Datasheet