TDK Lambda ZUP-PLUS

2U 200W, 400W, 600W and 800W Bench or Rack Mount Power Supply

Suitable for bench or 2U rack mounting, the Z+ is a very compact programmable power supply offering power levels from 200 to 800W, voltages of up to 650V and currents of up to 72A. Multiple remote programming methods are available including built-in USB, RS232 & RS485 and optional LAN, GPIB & isolated analogue interfaces. The units can operate in either constant current or constant voltage mode and accepts a wide 85-265Vac input. The product is backed with a five-year warranty.

200W & 400W Models

Applications

  • Test and Measurement:Built-in Last-Setting memory based on Flash Memory no battery or capacitor backup. Simplifies test design and requirements. Built-in RS-232/RS-485 gives maximum system flexibility along with 0-5V and 0-10V, selectable analog programming. Wide range of available inputs allows testing of many different devices.
  • Semiconductor Burn-in: Safe-Start mode ENABLED – to re-start at Output OFF to protect load. Wide range input (85-265Vac) with Active Power Factor correction rides through input transients easily.
  • Component Test:High power density, zero stacking and single wire parallel operation, give maximum system flexibility.
  • Laser Diode: OVP is directly set on Voltage Display, assuring accurate protection settings. Fast Constant Current response, no over shoot. Current Limit Fold Back assures load is protected from current surges.
  • Heater Supplies: Smooth, reliable encoders enhance front panel control. Remote analog programming is user selectable 0-5V or 0-10V.
  • RF Amplifiers and Magnets: Robust design assures stable operation under a wide variety of loads. High linearity in Voltage & Current mode.

SERIES TABLE

ModelOutput InfoOutput Power ( W )
Z10-2010V / 20A200
Z10-4010V / 40A400
Z10-6010V / 60A600
Z10-7210V / 72A720
Z20-1020V / 10A200
Z20-2020V / 20A400
Z20-3020V / 30A600
Z20-4020V / 40A800
Z36-636V / 6A216
Z36-1236V / 12A432
Z36-1836V / 18A648
Z36-2436V / 24A864
Z60-3.560V / 3.5A210
Z60-760V / 7A420
Z60-1060V / 10A600
Z60-1460V / 14A840
Z100-2100V / 2A200
Z100-4100V / 4A400
Z100-6100V / 6A600
Z100-8100V / 8A800
Z160-1.3160V / 1.3A208
Z160-2.6160V / 2.6A416
Z160-4160V / 4A640
Z160-5160V / 5A800
Z320-0.65320V / 0.65A208
Z320-1.3320V / 1.3A416
Z320-2320V / 2A640
Z320-2.5320V / 2.5A800
Z375-2.2375V / 2.2A825
Z650-0.32650V / 0.32A208
Z650-0.64650V / 0.64A416
Z650-1650V / 1A650
Z650-1.25650V / 1.25A812.5

SPECIFICATIONS TABLE

INPUT VOLTAGE:85 – 264VAC
FREQUENCY:47 ~ 63Hz
INPUT HARMONICS:Complies with EN61000-3-2
POWER FACTOR:Complies with EN61000-3-2 Class A (0.99 typ)
EFFICIENCY:Model dependent: 88%
LOAD REGULATION:2mV + 0.01% of rated voltage over 0 – 100% load change
LINE REGULATION:2mV + 0.01% of rated voltage over a 85 – 132 or 170 – 265VAC line change
OPERATING TEMPERATURE0 – 50°C

You may also like...