The Genesys™ Full-Rack (GEN-1U) series of DC Programmable Power Supplies provides high power density (up to 780W/1560W) with a complete set of user-friendly interfaces within a 1U full-rack profile. It offers Output voltages from 6V (@ 100A/200A) to 600V (@ 1.3A/2.6A) and a wide-range AC Input (85-265VAC, 47/63Hz) with Active Power-Factor Correction (0.99 @ rated load).

These units can operate in either Constant-Current (CC) or Constant-Voltage (CV) mode with a user-friendly front panel interface (continuous encoders for FINE and COARSE adjustment and four-digit LED Voltage and Current meters) and provide safety features such as Safe/Auto Re-Start, Last Setting Memory and built-in protective functions (OVP, UVL, Current FOLDback, OTP and AC Low-Line).

Multiple remote programming/monitor/control methods are available including the built-in J1 Remote Analog and the RS232/RS485 Multi-Drop Remote Digital Interface (where up to 31 units may be controlled). Other Optional Remote Digital Interfaces (LAN, IEEE and USB) and Isolated Analog (5V/10V and 4-20mA) Interfaces are optional and factory installed (one per power supply). Instrument Software Drivers (NI LabView and NI LabWindows) are also available.



Model Output Voltage (VDC) Output Current ( A ) Output Power ( W )
GEN6-100 0~6V 0~100 600
GEN6-200 0~6V 0~200 1200
GEN8-90 0~8V 0~90 720
GEN8-180 0~8V 0~180 1440
GEN12.5-60 0~12.5V 0~60 750
GEN12.5-120 0~12.5V 0~120 1500
GEN20-38 0~20V 0~38 760
GEN20-76 0~20V 0~76 1520
GEN30-25 0~30V 0~25 750
GEN30-50 0~30V 0~50 1500
GEN40-19 0~40V 0~19 760
GEN40-38 0~40V 0~38 1520
GEN50-30 0~50V 0~30 1500
GEN60-12.5 0~60V 0~12.5 750
GEN60-25 0~60V 0~25 1500
GEN80-9.5 0~80V 0~9.5 760
GEN80-19 0~80V 0~19 1520
GEN100-7.5 0~100V 0~7.5 750
GEN100-15 0~100V 0~15 1500
GEN150-5 0~150V 0~5 750
GEN150-10 0~150V 0~10 1500
GEN300-2.5 0~300V 0~2.5 750
GEN300-5 0~300V 0~5 1500
GEN600-1.3 0~600V 0~1.3 780
GEN600-2.6 0~600V 0~2.6 1560


 Input voltage/freq. (*1)  85~265Vac continuous, 47~63Hz, single phase
Power Factor 0.99 @100/200Vac, rated output power.
EN61000-3-2,3 compliance  Complies with EN61000-3-2 class A and EN61000-3-3 at 20~100% output power.
Input current 100/200Vac 750W :10.5A / 5A, 1500W :21A / 11A
Inrush current 100/200Vac 750W :Less than 25A, 1500 W :Less than 50A
Hold-up time More than 20mS, 100Vac, at 100% load
Parallel Operation Up to 4 units in master/slave mode with single wire current balance connection
Series Operation Up to 2 units. with external diodes. 600V Max to Chassis ground
Operating temp 0~50°C, 100% load
Operating humidity 30~90% RH (non-condensing)
 Vibration MIL-810E, method 514.4, test cond. I-3.3.1. The EUT is fixed to the vibrating surface.
Shock Less than 20G, half sine, 11mSec. Unit is unpacked.