This modular, industrial quality AC/DC power supply system with power factor corrected input is built with three 1500W, PFC 1K5 power supply modules assembled on a 3U x 19″ stainless steel cradle (CR 3U-3XU5512). The PFC 1K5 units are equipped with connectors which allow hot pluggability. A built-in redundancy diode in each module allows for parallel connection and N+1 redundant operation. The system delivers a maximum of 4500W or 3000W with N+1 redundancy.
The PFC 1K5 modules are based on field-proven topology. They have large design headrooms and are rated for operation over the specified temperature range without de-rating. Each module is cooled by a high-quality built-in fan. Full electronic protection and the use of components with established reliability results in a high demonstrated MTBF confirmed by a track record in numerous applications. The system is manufactured at our plant under strict quality control.
|Input Protection||On each module: Inrush current limiting Varistor Internal safety fuse Lower voltage than the specified minimum input will not damage the unit.|
|Efficiency:||Output voltage dependent, typically 80% at full load.|
|Operating Temp:||0ºC to 50ºC for full specification.Extended temperature range available on request|
|Cooling||Each module has one high quality built in fan|
|Voltage Adjustment||Customer specified|
|Regulation||±2% combined from zero load to full load including redundancy diode|
|Shock/Vibration||IEC 61373 Cat 1 A&B|
|Weight||3U system with 3x PFC1K5 modules:20kg (44 lbs) approx.|