ICT Sine Wave Series

Inverters with TCP/IP Ethernet for remote monitoring and control

Built-in Ethernet communications allows remote power-cycling of connected loads, possibly saving a service call to a remote site.

The Sine Wave Series is a pure sine wave 1500 watt inverter that will convert 12, 24 or 48 volts DC to ultra-clean 230 volts, 50 Hertz AC output at 93% peak efficiency. The ICT Sine Wave Series is very compact for its power level, is extremely efficient, and includes TCP/IP Ethernet for remote monitoring and control. An optional AC fast transfer relay is available to allow switching between the inverter and AC mains or generator power. An available 19-inch rack mounting tray holds one or two inverters, and a DC wiring box is available for installations where electrical code compliance is required. All wiring connections are on the back, close to where rack wiring connections are located. Every model can be ordered with a single AUS/NZ AU1-10P convenience outlet mounted on the front faceplate.

The  Sine Wave Series is ideal for both standalone applications using its optional DC wiring box with electrical knockouts, or for communications, network and industrial power applications using the optional 19 inch rack-mounting tray and standard hardwire AC connectors on the back of the inverter. The idle current draw is very low, making the Sine Wave Series a good fit for applications where battery life is important, such as off-grid power systems, tower and communications sites, and renewable energy systems. With TCP/IP Ethernet, a user can monitor the inverter, power-cycle the output to reboot connected loads such as blade servers, or shut the inverter down remotely to conserve power with either the integrated HTML web server or SNMP protocols.


The Sine Wave Series features 93% peak efficiency, ultra-low noise, and low idle current draw to preserve battery life. The robust design will operate at 3000 watts of output for 2 seconds in order to start demanding loads. With AC hardwire points on the back, and an optional single front AC outlet, the Sine Wave Series is adaptable to various types of installation requirements, whether standalone or rack-mounted. Both the standard Form C alarm contacts and TCP/IP Ethernet connection can be used to send a remote alarm signal for any type of fault, ideal for remote installations where the site is not easily accessible. Built-in Ethernet communications allows remote power-cycling of connected loads, possibly saving a service call to a remote site.


The ICT Sine Wave Series provides an unparalleled set of options to meet a variety of application requirements.

Fast Transfer RelayAutomatically senses and switches between
battery and AC grid power or generator
19” Rack Mount TrayMount 1 or 2 Sine Wave Series in 19”, 2RU site equipment rack
DC Wiring BoxComes with knockouts and fasteners for
electrical wiring code installations
Front Power OutletOne front mounted AUS/NZ AU1-10P outlet


Description 12 VDC Input24 VDC Input 48 VDC Input
Inverter with factory-installed TCP/IP Ethernet communications portICT1500A-12SWCICT1500A-24SWCICT1500A-48SWC
Inverter with factory-installed transfer relay and TCP/IP EthernetICT1500A-12SWTCICT1500A-24SWTCICT1500A-48SWTC
19” Rack Mount Kit, holds two Sine Wave Series invertersICT-RMK4
DC Wiring Junction Box with 5 electrical knockout positionsICT-DCWB
Add front mounted AS/NZS AU1-10P convenience outletAdd modification no. M100185 behind the model number when ordering


Input voltage range12VDC,  ( 10.5-16 )
24VDC ( 21-32 )
48VDC ( 42-64 )
Output Power1500 watts
Peak Output Power3000 watts 2 seconds
Frequency50Hz +/-0.2Hz
Output Voltage230VAC +/-10VAC rms
Operating Temp. -30ºc to 60ºC
CoolingTemperature Controlled Fans


Land Mobile Radio LMR Networks DC Power Supplies

Intelligent DC Power Supplies for Radio Access Networks

You may also like...