OPUS DUAL System

DC/AC Inverter 1500VA / 1200W

The OPUS Inverter system is a redundant, fault tolerant system. Inverter system is an optimal solution when long autonomy time and long battery service life are required. Inverter system is compatible with several battery configurations. Inverter system fits in the standard 19″ racks and cabinets. DUAL inverters efficiencies are high, up to 90%.

The OPUS Inverter system has a modular construction. The inverter modules can be combined with static switch, manual bypass, AC distribution and 3-phase synchronization modules based on customer’s needs.Additional integration options include the advanced VIDI+ controller, temperature sensors and battery monitoring.

Key features

  • Small size, light weight
  • Available in on-line and off-line configurations
  • Redundant N+1 operation
  • Hot swap plug-in capable
  •  Remote monitoring via web interface, SNMP traps, SMTP mail alerts and Modbus TCP/IP
  • Safety: EN 60950-1

Applications

  • Telecommunications equipment
  • Industrial systems
  • Utility systems
  • Military systems

SERIES TABLE

Model Input Voltage (Range)
VDC
Output Voltage (AC) Output Current Max (A) 
EIM62434FR40 – 722306.5

SPECIFICATIONS TABLE

Input voltage40-72 VDC
User programmable (PC/RS-232) start-up and shut down voltage limits and delays
Input current35 A max (continuous)50 A max (5 s)
Inrush current< 20 A
Output voltageNominal 230 VAC sine wave, user programmable 200-240 VAC, floating output
Output frequencyNominal 50 Hz, user programmable 40-70 Hz, floating output
Nominal output power1500 VA / 1200 W
Output currentNominal 6.5 A, short circuit 13 A max
Efficiency0.9
Static regulation, 0-100% load±3%
Load power factor rangeFull power rating from 0 inductive to 0 capacitive
Total harmonic distortion, resistive load< 2%
Transient recovery< 0.3 ms
Psofometric noise, input< 2mV
Crest factor> 3
IsolationInput-Chassis 1500 VAC (2000 VDC)Input-Output 3000 VAC (4000 VDC)Output-Chassis 1500 VAC
(2000 VDC)
Overload140% (1700 W) / 5 seconds
Max time can be limited shorter, 110% / 60 s is always available. Number of restart attampts and delays are user programmable
ProtectionOutput current limiting. Overload and short circuit proof. Input and output fuses.
LED-IndicationsInput ON Output ON
Output loading, 4 levels: >5%, >30%, >50%, >80% Overload / Fault
Relay alarms
Relay alarms2 relay contacts:
Fault in system summary alarm (module failure, DC input low etc)
Primary supply failure (system with bypass) or Output ON indication (system without bypass)
Remote monitoring through RS-232 (Remote monitoring software)Status information: For example input and output voltage, power, temperature, faults etc Parameter adjustment: For example input voltage limits, output volt- age, over load, faults etc.
Operating temperature0…45 C full power, 45…60 C reduced power, derating -2%/C typically
CoolingForced cooling front to rear, 2 fans inside the module.
Fans are redundant, one fan is enough for cooling in normal conditions
Humidity5…95%, non condensing
AltitudeFull power up to 2000m, derating -2% / 100m, max altitude 3000m

You may also like...