Site Series

Fully Isolated DC/DC Converters, 12 or 24V Single output: Up to 100A

The Site Converter Series are high current, high-efficiency rack mount DC to DC converters designed for dual-voltage site applications where a 24 or 48 volt DC input needs to be converted to a 12 or 24 volt DC output to power two-way radios, repeaters, RF amplifiers, trunking systems, or other sensitive electronic equipment. The wide-ranging input is 20 to 60 volts DC, so the ICT Site Converter will support a variety of input voltages. There are four models available to support peak current of 35 or 50 Amps at 24-volt output and 70 or 100 Amps at 12-volt output. Efficiency is 90%, meaning less energy will be lost in the conversion process.

The Site Converter is fully isolated, and can be used in positive or negative ground environments. The wide-ranging input voltage is also ideal for sites where the DC voltage may fluctuate. The Site Converters built-in protection features protect the converter as well as the connected loads from abnormalities.

Output voltage is adjustable using a front-mounted trim pot. A remote alarm contact will signal when DC fails or the converter shuts down. A remote contact terminal allows the converter to be shut down remotely for servicing or to conserve the battery when not in use.


Model Number Input Voltage Range Output Voltage Range Output Current (Cont.) Output Current (Peak)
ICT206012-70AI2 20-60 VDC 12.5-14.5 VDCa)
+/- 300 mV
64 Amps 70 Amps
ICT206012-100AI2 20-60 VDC 12.5-14.5 VDCa)
+/- 300 mV
96  Amps 105 Amps
ICT206024-35AI2 20-60 VDC 25.0-29.0 VDC b)
+/- 600 mV
32  Amps 35 Amps
ICT206024-50AI2 20-60 VDC 25.0-29.0 VDC b)
+/- 600 mV
48  Amps 52 Amps
a) Factory set to 13.8VDC.  b) Factory set to 27.6VDC.


Input Voltage Range 20-60 VDC
Line Regulation 0.005
Load Regulation 0.03
Efficiency Typical 0.9
Operating Temperature  -30 C to +60 C

Related Products