Bravo 10 48/230

1U Rack Mount Modular Inverters: 48Vdc/230Vac 1.25kVA

Bravo 10 is a compact modular inverter that converts a 48 Vdc power source into 230 Vac. By using at least three modules, we can offer solutions for three-phase infrastructures (3x400Vac + N).An additional AC input is used under normal conditions to achieve an overall conversion efficiency of 96%. In the event of a grid failure, it automatically switches to the DC to secure the loads.

The modularity is maximum thanks to increments of 1.25 kVA / 1 kW only! Different configurations are possible such as monitoring integrated in the shelf or not, and for single-phase or three-phase systems.

From 1 to 32 modules, with several options available (manual external by-pass and AC distribution), the Bravo ECI is also hot-swappable meaning very easy and cheap maintenance. The modules are delivered with our new monitoring solution.

Applications

  • All business-critical applications from 1.25 kVA to 40 kVA.
  • The module can be integrated into shelves to design 1 phase (230 Vac) or 3 phases (3×400 Vac) configuration with different power output.
  • We already designed 3 shelves configuration: 5 modules (6.25 kVA, 1 phase), 4 modules (5 kVA, 1 phase) with the monitoring included and 9 modules (11.25 kVA, 1P) with the monitoring.

Specifications Table

Power
AC Output Power
Nominal Output power (VA) / (W)1250 VA / 1000 W
Short time overload capacity125% (15 seconds)
Admissible load power factorFull power rating from 0 inductive to 0 capacitive
DC Input Specifications
DC voltage: Nominal / range48 VDC / (40-60V)*
Nominal current (at 48 Vdc and 2400 W output)22.3 A
Maximum input current (for 15 second) / voltage ripple27.5 A / < 10 mV RMS
AC Input Specifications
Nominal voltage (AC)230 V
Voltage range (AC)150 – 265 V
Brownout800 W @ 150 Vac / 1000 W @ >190 Vac linear decreasing
Power factor> 99%
Frequency range (selectable) / synchronization range50 Hz (range 47 – 53 Hz) / 60 Hz (range 57 – 63 Hz)
AC Output Specifications
Nominal voltage (AC**)Adjustable: 220 VAC – 240 VAC
Frequency / frequency accuracy50 or 60 Hz / 0.03%
Total harmonic distortion (resistive load)< 3%
Load impact recovery time (10% – 90%)<= 0.4 ms
Nominal current5.4 A @ 230 Vac
Crest factor at nominal power3 : 1 for load P.F. <=0.7
Short circuit clear up capacity 0-20 ms20 A for 20 msec – Available while Mains is available at AC input port / 16 A DC/AC
Short circuit current after >20 ms -15 s7 A RMS
AC output voltage stability ±1% from 10% to 100% load
In Transfer Performance
Max. voltage interruption / total transient voltage duration (max)0 s / 0 s
Signaling & Supervision
DisplaySynoptic LED
Alarms output / Supervision2 dry contacts, 2 digital inputs / Inview GW (3 LEDs) or Inview S (2.8” touchscreen)
Remote on / offOn rear terminal of the shelf
EMCEN 61000-4-2 / EN 61000-4-3 / EN 61000-4-4 / EN 61000-4-5 / EN 61000-4-6 / EN 61000-4-8
ETSI EN 300386 v1.9.1
SafetyEN62040-1
CoolingForced
MTBF240 000 hrs (MIL-217IF)
Efficiency (Typical): Enhanced power conversion / on line96% / >92.5%
Dielectric strength DC/AC4300 Vdc
RoHSCompliant
EnvironmentETSI EN 300019 / ETSI EN 300132.2
Altitude above sea without de-rating of power< 1500 m / derating > 1500 m – 0.8 % per 100 m / max 4000 m
Ambient temperature -20 to 40° C
derating from 40°C to 65°C
Storage temperature / relative humidity -40 to 70°C / 95%, non-condensing
Material (casing)Alu Zinc

You may also like...

Modular Inverters Bravo ECI 48 Vdc input 1.25 kVA - Rack Mount Modular inverter ECI Bravo Modular Inverters 48...