Modular Power Series

1U Redundant Hot Swap Modular Power System for 12VDC

The ICT Modular Power Series system provides flexible, managed DC power for a broad range of communications and broadband applications. The foundation is the power shelf and 700W high-efficiency power modules. A number of optional factory-installed modules can be selected to provide TCP/IP monitoring and control, advanced battery management features, battery breakers, low voltage disconnects, and four-position breaker-protected power distribution including load current monitoring and remote power cycling over Ethernet.

Intelligent Control Module

TCP/IP Controller for ICT Modular Power Series

The ICT Intelligent Control Module is a factory-installed option for the ICT Modular Power Series that provides TCP/IP monitoring and control of the system. When used with the optional Battery Management Module, it provides advanced battery reporting and management features, including estimated state of charge and run time remaining, battery discharge testing, and low voltage disconnect control and reporting. When used with the optional Load Distribution Module, it provides reporting of individual load current levels, remote power cycling of connected loads, automatic load shedding, and network watchdog (ping) features.

  • Complete local and remote monitoring and control of up to eight Modular Power System components
  • TCP/IP with an embedded web browser for instant set up and ease of use
  • SNMP for network management integration
  • Advanced battery management and load distribution features when combined with optional Battery Management and Load Distribution Modules
  • Environmental alarm sensor inputs allow site monitoring and remote alarm reporting without the need for a separate site monitoring system
  • Password protection
ICM (Intelligent Control Module) Datasheet

Load Distribution Module

  • TCP/IP remote management and power control of individual outputs (with Intelligent Control Module installed)
  • Four fully managed load outputs can be power cycled individually (30A max. each)
  • Monitoring and alarm reporting of each output for pinpointing of issues with connected loads
  • Adjustable alarm and load-shed settings for each output

Battery Management Module

  • Single or dual 100 amp battery disconnect circuit breakers
  • Integrated 150 amp low voltage disconnect
  • Advanced battery management features (with Intelligent Control Module installed) including temperature compensated charging, display of battery voltage, status, battery current, state of charge, run time remaining; adjust LVD settings; configure advanced battery management features such as boost charge parameters, max charge current, battery capacity, battery test timer, and battery discharge test cut-off voltage

Software Demonstration

 

SERIES TABLE

DescriptionPOS 12VDC
Intelligent Power Shelf with integrated Control Module and Ethernet communications. 1400 Watts Maximum. Factory-installed 100A Battery Management Module with Low Voltage Disconnect and four position Intelligent Load Distribution Module.ICT-IPS-BMM-LDMP
Intelligent Power Shelf with integrated Control Module and Ethernet communications. 1400 Watts Maximum. Factory-installed 100A Battery Management Module with Low Voltage Disconnect and four position Intelligent Load Distribution Module.ICT-IPS-BMMD-LDMP
Intelligent Power Shelf with integrated Control Module and Ethernet communications. 2100 Watts Maximum. Factory-installed 100A Battery Management Module with Low Voltage Disconnect .ICT-IPS-BMMP
Intelligent Power Shelf with integrated Control Module and Ethernet communications. 2100 Watts Maximum. Factory-installed dual 100A Battery Breakers with Low Voltage Disconnect .ICT-IPS-BMMDP
Intelligent Power Shelf with integrated Control Module and Ethernet Communications. 2100 WattsMaximum. Factory-installed four position Intelligent Load Distribution Module.ICT-IPS-LDMP
Intelligent Power Shelf with integrated Control Module and Ethernet Communications.2800 watts Maximum. Accepts up to four Power Modules.ICT-IPS
Standard Power Shelf accepts up to four Power Modules. Designed to combine with ICT-IPS Intelligent Power Shelf, ICT-JMP and ICT-PAR to provide expanded power system with up to 4900 Watts of Ethernet-managed power.ICT-SPS

SPECIFICATIONS TABLE

AC INPUT
Nominal system voltage120/240VAC
Input voltage range100-300VAC
Power factor (typical)0.99
Frequency50/60Hz
DC OUTPUT
Power output per module700W
Output current per Power Module 50A-12VDC
Max. system output current with 4 Power Modules (120/240VAC) 150A-12VDC
Efficiency (typical) 90%-12VDC
Output ripple (rms) 30mV-12VDC
MECHANICAL
AC input connectorTerminal Block, #8 – #16 AWG
DC output connectorBusbars with 5/16” bolts
Remote alarm connectorsTerminal Block (#16 -24 AWG)
Mounting1RU, 19 in rack mount
Weight (Power Shelf empty)8.1lbs / 3.7 kg
Weight (Power Shelf + 4 modules)18.5 lbs / 8.4 kg
Dimensions – H X W X L 1.74 x 19.0 x 15.7 in. / 44 x 483 x 398 mm
ENVIRONMENTAL
Operating temperature range -30º to +60ºC
Output derating2% / ºC (above 50º C)
Storage temperature -45º to +85ºC

Software Demonstration

Software Demonstration

Applications

Intelligent DC Power Supplies for Radio Access Networks

You may also like...

12VDC Modular Power Series with DC Distribution 12V Modular Power Series DC Po...