48V And 24V DC Power System With Integrated 12V Or 24V DC Converter
Managing your backup system and critical loads with two different voltage levels is now possible with the new ICT Hybrid Ultra and ICT Hybrid Power Series. The dual output voltage configuration brings more flexibility while maintaining a high level of reliability with the standard battery management features and ethernet enabled monitoring capabilities.
The new series are ideal for restricted space applications where the primary DC voltage is positive or negative 48V or 24V DC, and auxiliary voltage of 12V or 24V DC is required to power certain devices at the site.
ICT Hybrid Power Series
- Up to 3000W output Power
- 700W or 1500W AC-DC Power modules – 48V or 24V DC output
- 700W DC-DC Converter Module – 12 VDC output
- Dual 100 amp battery breakers with battery management module
- Digital and analog inputs for temperature and site sensors
- Full range of certifications including CSA/UL, FCC Class B, CE, ROHS
ICT Hybrid Ultra Series
- Up to 7500W output Power
- four to five 700W or 1500W AC-DC Power modules – 48V or 24V DC output
- 700W DC-DC Converter Module – 12 VDC output
- Dual 100 amp battery breakers with battery management module
- 4 or 8 fully managed load outputs
- Digital and analog inputs for temperature and site sensors
- Full range of certifications including CSA/UL, FCC Class B, CE, ROHS
Applications
Two-way Communications Networks
Trunked Radios Systems
Backhaul
DAS
SCADA
Security & Surveillance
Main Features
Integrated Intelligent Control Module – ICM Controller
- TCP/IP remote Ethernet communications for monitoring and control
- Embedded web server for plug and play set up
- HTTP/HTTPS, SMTP, SNMPv1/v2c/v3 protocols supported
- AC input voltage, DC output voltage, system current reporting (local and Ethernet)
- Four site monitoring sensor inputs with alarm reporting
- Local and remote output voltage and current limit adjustment
- Up to 30 days logging at 1 minute sampling rate, csv file download, major event logging
Integrated Load Distribution Module (just for Hybrid Ultra Series)
- Display current reading of each of four load outputs
- Remote on/off control of individual outputs or entire load bus over Ethernet
- User definable alarm level indications (sent via Form C and Ethernet)
- User-definable load disconnect and reconnect levels
- Definable automatic load shedding
- Auto-ping automatic power cycling of specified load outputs
- Power-up delay sequencing
Battery Management Module
- Temperature-compensated charging
- Display of battery voltage status
- Battery current, state of charge, run time remaining reporting
- Adjust LVD settings
- Configure advanced battery management features such as
- Boost charge parameters
- Max charge current
- Battery capacity
- Battery test timer
- Battery discharge test cut-off voltage.
This features are available with Lead Acid batteries. The modular series is compatible with Lithium-ion batteries but battery monitoring and reporting is done by the battery itself. (read Using DC Power Supplies and Battery Chargers with Lithium-ion batteries for more info)
For technical support about our off the shelf products and customised power conversion solutions, get in touch today.
